Please register or log in.
  • (214 pages)
  • first
  • prev
  • 1
  • 2
  • 3
  • 4
  • 5
  • next
  • last
Advertisements in this category Notify me when new ads are submitted in this category
  Title ascendingdescending Consumption ascendingdescending Broken ascendingdescending Price ascendingdescending Picture
add to favorites Sports floor performance l/mile No $
No Picture
The sports floor is the floor dedicated to the indoor sports hall. The interlocking elastic knight sport flooring requires high sports performance, prevents the athlete from being damaged and makes the athlete more labor-saving. Therefore, the structure of the sports floor is more complicated than the ordinary household floor. The lack of sports flooring: 1 water-resistant variants - sports flooring made of pure wood, so pay attention to keep the ground dry, because the sports floor will see the uplift, bulge and other bad phenomena if it penetrates into the water eczema. Not only does it affect the use of the site to preserve the number of years of life, it will have a very large impact on the safety of athletes. 2Afraid of strong light and direct sunlight - No matter what kind of sports floor, it can not be exposed to the sun for a long time. Because of this, it is easy to cause the sports floor to reveal the explosive material. The effect of lighting on the floor: the color of the and the lighting position of the basketball court have a relatively direct impact. If we can't better consider the positional color relationship between the two, then it is easy to cause in the course of the game. Visually poor and reflective problems, so we must pay great attention to the color of the solid wood sports floor, so as to better avoid the related problems that may occur during the game. Features of Maple Birch Sports Floor: 1. The material of Maple Birch Sports Floor is even, the wooden annual ring is slightly clear and clear, the texture is straight and clear, the color is mild, the texture is clear and smooth; the wood is delicate and pale yellow; 2. Maple Birch Sports The nail holding power of the floor is strong, the material toughness is good, the material structure is fine and gentle, and the texture is slightly softer than the maple; 3. The maple sports floor is elastic, the processing performance is good, the cut surface is smooth, the paint and the glue performance are good. Birch It is a mid-range timber. 1. Platform: It should be kept at no more than 2mm under the straight side of 1.5mm, otherwise it must be adjusted with appropriate materials. 2. Waterproof membrane: The small 0.15mm polyethylene is lifted and glued to the wall and the 200mm overlap is retained at the joint. 3. Gymnasium Sports Floor: Cut and lay the panels, providing expansion joints along the perimeter and the net and other fixed points. 4. Allowable expansion and contraction: The width of each floor is 20mm shrinkage joint to ensure the expansion of the interlocking elastic pro sport court of the gymnasium under the conditions of mechanics and air dry humidity. Basketball courts are used in basketball courts and gymnasiums at home and abroad. With the development of sports, the basketball floor has also been used in sports venues of schools and business units. Most customers cannot accurately distinguish their strengths and weaknesses when purchasing basketball floors. In addition, due to the late construction technology and practice, it is easy to cause the basketball court to deform and the ground is uneven, causing unnecessary economic losses to the parties, which will have an impact on future acceptance.
add to favorites Crushing Theory of Metal Crusher   No  
No Picture
Construction Waste Crusher is the main section of the steel crushing output line. As metallic crusher creation line has highly developed technological innovation, superior generation capability and it might different non-ferrous metals and remove the non-metallic overseas matters and procedure high-quality steel with significant purity, and what's additional, the equipment has minor ecosystem air pollution in the course of the crushing system, it's honored since the most highly developed waste steel processing equipment. The crushing basic principle of steel crusher is using the hitting on the hammers. The waste metal sent by chain scraper conveyor falls into your metal feeder, and once the push-and-pull on the feeding roll along with the extrusion molding of your reshaping roll, it will eventually go into your metal crusher. The crushed waste metal will get kinetic power through the hammers and rush on the grating bar or maybe the relaxation waste steel with substantial velocity and the steel more compact than the hole of your grating bar will be discharged from the hole on to the vibrating conveyor, as well as the steel larger than the hole will probably be impacted by the hammers and rub with all the relaxation metal and then be crushed, and finally will probably be discharged in the hole of the grating bar right after achieving the skilled granularity. Though crushing the squander metal, the iron rust and paint around the floor from the waste metal are going to be divided and also the powder dust are going to be collected and processed by the dust accumulating process on the top rated on the crusher.
add to favorites composed of crusher machine   No  
No Picture
In mining, building materials, construction and other industrial sectors, crusher machine is mainly used for rough pieces and the pieces of work. According to the width of the feed inlet can be divided into three s, small, medium, large machine feeding port width is greater than 600mm, inlet width medium in the range of 300-600mm, and the feeding port width minicomputers than 300mm to school crusher grade has the advantages of simple structure, reliable working. Crushing is mainly composed of crusher machine teeth plate two jaw plate is completed, a fixed jaw jaw, vertical or upper slightly decumbent fixed in the front wall of the body, and a movable jaw is movable jaw plate, position of some tilt, the formation of a fixed size of working area and the fixed jaw plate.The two jaw plates do relative periodic reciprocating motion, the sometimes separately, sometimes close. Jaw plate apart, the material into the crushing chamber, the crusher machine bearing complete crushing work after the finished product can be discharged from the lower part of the jaw plate; near, is arranged between the two jaw plate material will be crusher machine teeth plate extrusion, bending and splitting force, resulting in broken. According to the different way of movable jaw, crusher machine can be divided into crusher machine, complex crusher machine, integrated crusher machine three. Jaw crusher accessories by double elbow board and single toggle plate two composed of double toggle plate in the work, the movable jaw only simple arc swing, so this model is also called crusher machine; while the single toggle plate in arc also moves up and down.
add to favorites Cold Rolled Coils And Cold Rolled Strips   No  
No Picture
Now the steel industry is developing better and better. The former iron products are easy to rust and easy to corrode and not durable. The high quality rolled hard roll steel coil is also slowly replacing the original iron products. The cold rolled coils have good surface quality, high smoothness and are not easily oxidized. Business welcome. Moreover, many consumers are entangled in the purchase process. What is the difference between cold rolled coil and cold rolled strip? Let's talk about their differences today: Cold rolled coils are often called cold rolled coils. Due to the cold work hardening caused by continuous cold deformation, the strength and hardness of the rolled hard rolls are increased, and the toughness index is lowered. Therefore, the punching performance is deteriorated only for the parts that are simply deformed. The cold-rolled steel sheet is processed from a hot-rolled sheet at a normal temperature. Although the steel sheet is heated during the processing because of rolling, it is called cold rolling. Since the cold rolling of the hot rolling through the continuous cold deformation is relatively poor in mechanical properties, the hardness is too high. It must be annealed to restore its mechanical properties. The unrolled hard rolled coil is usually used for products that do not require bending. The cold-rolled coil is produced by rolling hot-rolled coils at room temperature below the recrystallization temperature, including plates and coils. Many domestic steel mills such as Baosteel, Wuhan Iron and Steel, and Anshan Iron and Steel can produce. The steel plate, also called the steel plate, is also called the steel plate, which is called the steel plate or the flat plate.
add to favorites Cold Rolled Coils And Cold Rolled Strips   No  
No Picture
Now the steel industry is developing better and better. The former iron products are easy to rust and easy to corrode and not durable. The high quality rolled hard roll steel coil is also slowly replacing the original iron products. The cold rolled coils have good surface quality, high smoothness and are not easily oxidized. Business welcome. Moreover, many consumers are entangled in the purchase process. What is the difference between cold rolled coil and cold rolled strip? Let's talk about their differences today: Cold rolled coils are often called cold rolled coils. Due to the cold work hardening caused by continuous cold deformation, the strength and hardness of the rolled hard rolls are increased, and the toughness index is lowered. Therefore, the punching performance is deteriorated only for the parts that are simply deformed. The cold-rolled steel sheet is processed from a hot-rolled sheet at a normal temperature. Although the steel sheet is heated during the processing because of rolling, it is called cold rolling. Since the cold rolling of the hot rolling through the continuous cold deformation is relatively poor in mechanical properties, the hardness is too high. It must be annealed to restore its mechanical properties. The unrolled hard rolled coil is usually used for products that do not require bending. The cold-rolled coil is produced by rolling hot-rolled coils at room temperature below the recrystallization temperature, including plates and coils. Many domestic steel mills such as Baosteel, Wuhan Iron and Steel, and Anshan Iron and Steel can produce. The steel plate, also called the steel plate, is also called the steel plate, which is called the steel plate or the flat plate.
add to favorites How to use Top Quality Model 125 Large Rice And Wheat Thresher? l/mile No  
How to use Top Quality Model 125 Large Rice And Wheat Thresher? Let me introduce you today: (1) When working with rice and wheat thresher, the feeding inlet should be brought to the wind to avoid affecting the cleaning effect. (2) When the rice and wheat thresher use a diesel engine, a gasoline engine or an electric motor as a power machine, the rice and wheat thresher and the power machine are fixed on the ground and driven by a flat belt. The advantage of this type of transmission is that the belt is slippery during overload, which can protect the machine and can be used for long distance transmission, and the transmission is stable. (3) The rice and wheat threshers need to be operated by five people. The two people carry the rice and wheat to be fed to the feeding platform. One person feeds into the machine, and the feeding is uniform. The other two handle the picked peanuts separately. With crushed leaf stalks to prevent accumulation of blockages. Maintenance of rice and wheat thresher: (1) The drum and idler bearings of the rice and wheat thresher are filled with butter once every 20 to 30 hours. There is an oil cup on the fan bearing seat. After every 4 to 6 hours of operation, rotate the oil cup cover several times to ensure lubrication. (2) When working 8~10dx, check whether the bolts and other connectors are loose and fasten them in time. (3) After the rice and wheat, thresher is working, remove the soil, feed the activity into the table, and tighten the fixing nut for proper storage.
add to favorites parts of ballast crushing machine   No  
No Picture
With the aggregate process machine research and development continue to make new technology, application field of our mining machinery company crusher has been great expansion, is playing an important role in new materials and production work. In particular, stone parts of ballast crushing machine , in stone disposal, dry mortar industry production, widely used. building garbage crusher changed the traditional mode of single broken back breaking, the three cavity and two cavity broken like the combination way, greatly improves the application range of parts of ballast crushing machine, the crusher can be achieved on the material in the coarse crushing and fine crushing processing is convenient, in the market, by the widely praised the majority of stone stone production and processing of customer, market prospects. According to the development situation of our mine machinery company, the main products are fine crusher, coarse grinding function, the product is cubic, high packing density, stone pollution is low etc. In addition to stone parts of ballast crushing machine has simple and reasonable structure, feed grain shape, low operating cost advantage, to a great extent can replace the small parts of ballast crushing machine and parts of ballast crushing machine and equipment, really is a multi use machine.
add to favorites parts of ballast crushing machine   No  
No Picture
With the aggregate process machine research and development continue to make new technology, application field of our mining machinery company crusher has been great expansion, is playing an important role in new materials and production work. In particular, stone parts of ballast crushing machine , in stone disposal, dry mortar industry production, widely used. building garbage crusher changed the traditional mode of single broken back breaking, the three cavity and two cavity broken like the combination way, greatly improves the application range of parts of ballast crushing machine, the crusher can be achieved on the material in the coarse crushing and fine crushing processing is convenient, in the market, by the widely praised the majority of stone stone production and processing of customer, market prospects. According to the development situation of our mine machinery company, the main products are fine crusher, coarse grinding function, the product is cubic, high packing density, stone pollution is low etc. In addition to stone parts of ballast crushing machine has simple and reasonable structure, feed grain shape, low operating cost advantage, to a great extent can replace the small parts of ballast crushing machine and parts of ballast crushing machine and equipment, really is a multi use machine.
add to favorites Sports floor paving l/mile No $
No Picture
The indoor venue of the sports hall feels suitable and the use of detachable wood look indoor sport flooring covering has been in the country for many years. The products of sports flooring have various kinds of wooden flooring, and it is common to have maple and eucalyptus sports solid wood flooring. Sports floor Solid wood flooring is a natural material, with the irreplaceable advantages of synthetic materials, non-toxic and tasteless, comfortable feet, warm in winter and cool in summer. However, it also has a large consumption of hardwood resources, a large amount of laying and installation work, and the detachable indoor sport surface is prone to large dimensional changes with changes in relative humidity, and can be controlled by moisture content. Sports floor The same process of the wooden floor pavilion of the basketball hall: 1. original floor disposal; 2. rubber mat; 3. paving wooden keel; 4. paving the fur floor; 5. paving the anti-dust dust cloth; 6. paving the solid wood Floor; 7, the sports hall sports wood paint painting should be based on the principle of "first up, down, first and then outside". 8. After the paint is fully dried, it should be lightly ground with old sandpaper. When brushing the topcoat, the paint should be slightly thicker to make the paint film dry, which has both luster and fastening effect. 9. Dash: After painting and polishing, it is a line. In accordance with the Uni-President Standard Line. Sports floor The price of the wooden floor of the basketball hall: 1 the commercial prefabricated interlocking running track of the basketball hall; 2 the structure of the wooden floor of the basketball hall; 3 the wooden floor keel structure of the basketball hall; in general, the selection of the wooden floor of the basketball class is very particular. And the structure of the wooden floor of the basketball field is also very complicated, which also causes the difference in the cost of the wooden floor of the basketball field in the market. The domestic sports wooden floor can be used for the construction of table tennis sports floor, basketball court floor and badminton sports floor. The price of sports wooden floor can be negotiable according to the situation.
add to favorites Hot selling wheat thresher rice thresher Soybean Sheller workflow l/mile No  
The Hot selling wheat thresher rice thresher Soybean Sheller produced by Aike specializes in reliable quality, stable operation, and high work efficiency, and has won the favor of the majority of users and has been widely used. This equipment is one of many agricultural machines. It is the same as other agricultural machines, greatly reducing the labor of farmers' friends and making the farming income faster. Although wheat thresher rice thresher Soybean Sheller. It is very helpful to farmers' friends. Many farmers also understand the function and operation of the equipment. However, when the equipment is working, it will also malfunction due to various reasons. There are many reasons for the failure, but the fault caused by the operation error is also A large proportion, the following is a brief introduction to the wheat thresher rice thresher soybean sheller working process. In fact, the working principle of the wheat thresher rice thresher soybean peeling machine is very simple, using a cylindrical nail-shaped picking claw, and the fruit picking roller is a conical drum. At work, when the fruity soybean stalks are sent from the feed port to the fruit picking drum and the curved bottom screen, they are hit earlier by the picking claws, and the wheat stalks are grasped and moved with the claws. Due to the gap limitation between the picking claws and the curved bottom sieve, the wheat-soybean stalks are rubbed and squeezed in the picking drum and the curved bottom screen. At the same time subject to vibration. During the process of leakage, the leaves, soil and most of the lighter stems are blown out of the body due to the action of the fan. Wheat and soybeans were cleaned and dropped into the lower part of the rack. Thus, mechanical degranulation and shelling are completed at one time. Because the device adopts a conical picking roller and a cylindrical picking claw, it has strong ability to grasp, rotate and beat crops, has high production efficiency and less breakage. And the stolons are relatively neat, not limited by the humidity of the stolons.
add to favorites Wooden floor purchase considerations l/mile No $
No Picture
Many contact customers may think that the price of sports solid wood flooring is only wood material, and has nothing to do with other factors. However, the customer did not really understand that the choice of floor structure, logistics and transportation costs, installation technology, and the quality of the road surface are the factors that affect the price, and are easily overlooked. Now Xiaobian analyzes the reasons for the purchase of the wooden floor of the stadium. In the process of purchase, you should also consider the professional performance of professional sports wood flooring and professional purchasing standards for sports flooring. Professional sports wood flooring essential performance: First, reduce the size of the force instability phenomenon: the prefabricated elastic flat PP mat sport flooring has passed the anti-friction process to prevent the damage caused by various scratches in the area of ​​the scratch is not stable, enriched in a variety of wear-resistant wooden The use of stable points in the material prevents the phenomenon of elastic extremes in the process. Second, the function of resisting deformation: According to the use of the structural plate, it has a higher absorption vibration function, effectively improving the phenomenon of scratching in the wooden structural material, supporting the plastic material in gravity The phenomenon that should not rebound in the middle protects the firm function of the movement. Stadium wooden floor purchase considerations Third, the stability of wear resistance: According to the various wooden structure process, it can improve the phenomenon of excessive sliding in the anti-corrosion process, and protect the high light energy protection in the process of refraction. Professional purchasing standard for interlocking elastic flat PP mat sport flooring in gymnasium First of all, the surface layer: refers to the sports wood floor outer layer, is the contact layer of athletes, exercisers and the floor in the sports wood floor application. The surface layer mainly uses solid wood floor or solid wood composite floor as the surface layer material. The main layer is maple and eucalyptus. The panel is divided into A grade and B grade. The A grade panel has very small color difference and beautiful texture. The level is a little bit later. Secondly, the wool floor layer refers to the layer of the floor below the surface of the surface layer, which acts as a leveling, increasing strength and dispersing load. The wool floor material is mainly plywood with a thickness of 14mm or more. Stadium wooden floor purchase considerations Third, keel layer: refers to the support skeleton installed under the floor or under the floor layer. The keel is mainly made of soft pine wood. The keel of the sports floor is made of pine imported from Canada and has been treated with professional anti-corrosion and anti-corrosion treatment. Fourth, the elastic pad: refers to the addition of an elastic pad between the upper and lower keels to solve the problem of the floor sound, and the sports performance is better. The elastic cushion is a national technical product. It is made of natural rubber. It is durable, elastic, environmentally friendly, and has no odor. The half-life is 30 years. Fifth, moisture-proof layer: refers to the isolation or moisture-proof material placed between the surface layer and the prefabricated elastic flat wood look indoor sport flooring layer or the keel layer and the base layer of the building structure (cement floor), usually 0.5mm thick non-woven fabric. Commonly used sports wooden floors are maple or maple birch, and there are also wooden floors made of eucalyptus, Oufengmeifeng, etc. The stadiums have different choices depending on the climate, and the prices are different. According to your own needs, you can choose a strong, well-known brand of sports wood flooring manufacturers, generally better than some unheard of brands. At present, some businesses in the society who illegally operate sports flooring have made false propaganda for commercial interests, and even cut corners directly on the installation of sports wood floors and keels, causing huge losses to stadiums and engineering personnel.
add to favorites Technical standard for sports flooring l/mile No $
No Picture
Basketball is an important sport and people like it very much. Especially in the past 40 years of reform and opening up, the CBA professional basketball league has been established in China, which promotes the development of domestic basketball. Now, basketball can almost see every corner of society, from school to social enterprise. The construction of the basketball hall has started in recent years. There are many materials for the wooden floor in the indoor basketball court. For example, Maple Sports Floor, Birch Wood, Maple Sports Building. Features: bright color, clean panel, not mixed with other similar materials, such as birch, birch, to ensure the density of the material itself. The density of maple is lower than that of maple wood panels, which is close to imported North American maple wood. Basketball court engineers and Party A care about the price of elastic pro sport court for basketball when they buy basketball wood flooring. Sports flooring? There is no fixed answer. Because the price of basketball wood flooring is determined by many factors. Due to different materials, structures and installation conditions, the price fluctuates from 1,000 yuan per square meter in 300 years. The specific price should be determined according to the design plan. Please contact us for the pre-sales customer service of Euclidean Sports Wood Flooring. Below we combine the technical standards of sports flooring and the various materials commonly used in portable elastic pro sport court. Technical standard for sports flooring 1. It is the ability to absorb impact. Our sports floor sports floor absorption function must be greater than 53%. In the course of our exercise, about half of the impact is absorbed by the sports floor, and the other half of the impact is applied to the athletes, so that the athlete's legs and body can be well protected from collisions. It can also greatly reduce their fatigue level, so as to achieve the purpose of setting up sports ground sports flooring. 2, the friction coefficient should be appropriate, the general stadium friction coefficient is between 0.5-0.7. Proper friction allows the athlete to be relaxed during the running process without causing too much load on the ligament. The friction coefficient is too small to prevent slipping; the friction coefficient is too large, which makes the athletes exhausted. 3. The rebound resilience of the ball is also a measure of the sports floor technology of the sports field. We measured the resilience of the ball, mostly with inflatable basketball. We will let the basketball fall at different heights, see how high its bounce is, and then measure it with a stretch tester. The rebound strength of a good sports field sports floor is greater than 90%, so as to ensure that people can control the rotation and movement of the ball well. Sports flooring commonly used materials are now a variety of sports flooring materials, elastic double tier sport flooring tennis court commonly used materials? Commonly used materials are mainly maple, beech, maple birch, and these materials are divided into A, B grade, can According to the design requirements of the site, the site conditions select different materials and grades. This saves material and maximizes the performance of sports flooring. Sports floor
add to favorites Construction of sports flooring l/mile No $
No Picture
According to data surveys, since 2014, synthesis knight sport flooring have risen sharply, up 10% from last year, which has made some sports people stunned. Is the wooden floor of the gym expensive? For most users, many people are very concerned about the price of solid wood sports flooring. This is especially true when the construction budget of Party A’s stadiums is tight. Therefore, today we are working with the sports floor engineer Zhang Gong to analyze the situation, combined with the premise of sports wood floor construction and how to properly prevent moisture in the later stage. Sports wooden floor construction prerequisites: 1. Before the installation of sports wood flooring, the construction site must be kept clean and tidy, the construction quality of the ground should meet the requirements of architectural design; and waterproof, moisture-proof and gas-tight treatment should be done well; 2. The construction of the ceiling, ultrasound, electro-acoustic, lighting, and wall-covering in the stadium ends. After the water network pipeline has been subjected to the pressure test, it has confirmed that it has reached the design requirements and is in normal use. The wooden floor of the gym is not expensive. 3. Determine the moisture content of the floor material and the ground humidity and atmospheric humidity in accordance with the construction standards. , 4. When installing prefabricated elastic knight sport flooring, the leveling layer must be dry and meet the design requirements. 5. The installation of sports wooden floor should be set as the latter part of the gymnasium project, and cross construction is strictly prohibited. Sports wooden floor construction equipment: The wooden floor of the gym is not expensive. 1, equipment, tools and instruments: level, polishing machine, dust-free grinding machine, nail gun, electric hammer, impact drill, level and construction, woodworking tools, etc.; 2. Materials and materials: all kinds of required materials before the installation of sports wooden floor are transported to the place, properly stored and stored according to the product performance, and the storage quantity meets the construction progress of the sports wooden floor; 3. Inspection of construction conditions of sports venues: Check whether there are construction conditions, and submit the matters that do not meet the construction requirements to the relevant departments for negotiation and settlement. How to properly prevent sports wooden floors from moisture In daily life, sports wood flooring is a common phenomenon. Some people think that they should be blown dry with electric fans or air conditioners. In fact, water does not penetrate into the floor when the water volume is small. We only need to use dry. It is better to dry the rag with better water absorption. When the phenomenon of sports wood floor immersion occurs, the water on the floor surface should be quickly removed, then the door and window should be closed, the air conditioner should be adjusted to a low temperature, and the air conditioning cooling time should be adjusted according to the water seepage condition. Generally, the floor can be dried in about 1 day. In addition, the moisture-proof material selection for sports wood flooring is also a level that cannot be ignored. Moisture-proof performance is also an important indicator of detachable elastic knight sport flooring. If the moisture-proof performance is not up to standard, the moisture will penetrate into the edge of the wooden floor and the wood floor will be damaged. And when you are laying on the wooden floor, you also need to have an idea. You should choose to prohibit the rainy day paving in fine weather. The paving is sunny after 7 days. Before the paving, the ground must be dry. Choose a professional worker's pavement. Sports wood flooring is usually produced from maple and eucalyptus. In fact, the function of sports wood flooring is different from other wooden floors. Therefore, the price of sports wood flooring is often higher than other flooring. This is because sports wood flooring pays more attention to professional performance. The function of the sports wooden floor also determines the price of the sports wooden floor.
add to favorites Preparation Before Lifting The Roof Sheet   No  
No Picture
The components such as Galvalumed steel sheet made in China produced in the prefabrication plant shall be transported to the site by means of transportation means. The choice of transportation mode shall be based on the size and weight of the components, the number of components and the distance of transportation, and the specific conditions of the existing transportation vehicles. Determine after comparison. It is generally transported by car and flatbed trailers, and the components are transported directly to the construction site. During transportation, the components must be protected from deformation, non-dumping, and damage; the transportation road should be flat and solid, and the speed should be determined according to the road surface conditions to maintain a smooth running; the concrete strength of the reinforced concrete members should not be less than 70% of the design strength level; The loading and unloading of the components should be stable, and the transportation should be fixed firmly to avoid dumping; the position of the component pads should be correct during transportation, and the loading and unloading points should meet the design requirements. Transportation work should be reasonably organized and should be hoisted first and supplied according to the hoisting order. After the components enter the site, they should be stacked according to the plan layout plan of the structure hoisting plan prepared in advance to avoid secondary transportation. Generally, large-scale components such as columns and roof trusses should be placed in accordance with the layout plan of the components in the construction organization. The small and medium-sized components are stacked at the specified positions. Generally, the beams can be stacked 2-3 layers and the roof panels can be 6-8 layers.
add to favorites How to properly operate Top Quality Model 125 Large Rice And Wheat Thresher? l/mile No  
No Picture
In recent years, with the increase in the implementation of national agricultural machinery purchase subsidies, more and more users have purchased agricultural machinery. However, due to improper use, the performance of the product has not been fully utilized. In order to reduce the loss rate and increase the operating rate, the following describes the correct operation method of Top Quality Model 125 Large Rice And Wheat Thresher. 1. First, be sure to debug and check before use. Check that the various protective measures are perfect and that the link parts of each part are tight. Turn the pulley by hand to observe the collision friction phenomenon; check the solid condition of the hobbing, whether there are open welding and missing teeth; turn the roller by hand to observe whether the rotation is stable; check whether the tension of the triangle of each rotating part is reasonable; Whether the diesel engine is running well; check if the motor is running normally and there is no leakage of the power cord. A 5-minute dry run test must be performed before the operation. After confirming the correctness, tighten all the bolts of the rotating mechanism with a wrench to perform the feeding work. 2. After the empty running time has reached the specified level, the material will be fed in small batches for trial operation. If there is any problem, it should be stopped for inspection and adjustment. 3. When feeding the material, the peanut result part must be filled into the feeding port first, and kept in an appropriate amount, evenly and continuously. If the humidity is too high or rainy, the amount of feed should be reduced appropriately. 4. If there is rice and wheat blown out during the operation, the upper and lower positions of the fruit board should be changed; if there is rice and wheat jumping out, the position of the blocking fruit board should be adjusted. 5. If the cleaning is not clean during operation, the fan number can be increased or the wind baffle can be lowered; if the entrainment loss occurs during the cleaning, the fan number can be reduced and the wind baffle can be adjusted. 6. When the drum is clogged during operation, check the amount of feed, the humidity of rice and wheat, the tightness of the V-belt, and the power supply voltage. 7. When the automatic bagging device is used, when the rice and wheat are automatically bagged, the diverter plate should be moved in time to prevent blockage.
add to favorites How to deal with the trapezium mill   No  
No Picture
During the use of trapezium mill, long-term work will cause damage to various parts, so that the entire grinding machine is aging. How can we deal with this aging equipment? Trapezium mill consists of a large number of parts. These parts are subject to wear and tear during work. Severe wear will cause deterioration of the equipment. Aging equipment will not be able to serve the material processing process. Therefore, we Need to deal with it, here is to introduce the processing method. In general, for the trapezium mill after aging, our methods for its treatment are repair, replacement, renewal, and improvement repair. Generally speaking, these different methods have different usage conditions. Here we have detailed Different methods are introduced. When the tangible and intangible aging of the equipment exist at the same time, it should be updated to replace the old production machine with a super-fine grinding machine with high efficiency; At the same time of fully tangible aging, part of the x-th intangible ageing has occurred, and improved repairs should be used.
add to favorites Sc-zsfloor rest assured l/mile No $
No Picture
Sc-zsfloor rest assured The installation of stadium and theater stage wood flooring is a technical activity and requires a professional installation team to lay the pavement. In the sports wooden floor paving process of the stadium, some details need to be pre-processed and the work needs to be completed according to the complete installation process. Sc-zsfloor rest assured Variable-scale mixing method: the seams of the sports wooden floor are staggered. It is a common phenomenon. It seems that it is very chaotic. The seams of the sports wooden floor are not uniform or regular, but it is very strange. Why is that? This is actually due to the problem of resonance. The moving wooden floor will resonate during the impact process, and such a mixed-strip method can well avoid this situation and ensure the stability of the sports wooden floor system. Sc-zsfloor rest assured The gymnasium has high requirements for elastic flat PP mat volleyball sport flooring, so the materials are made of maple, maple birch and other woods. It guarantees pure solid wood. After special processing, the badminton hall wooden floor will not be easily damp, because wood After the floor is wet, it will show bulging, deformation and bending. Sc-zsfloor rest assured Sports wood flooring is a functional wooden floor with good sports performance that is different from home wood flooring. It is a set of integral structural system. The beautiful appearance and not easy to use are the unique features of sports wood flooring. The floor is the main basis for the sports hall to measure whether it is professional. Sc-zsfloor rest assured The installation of stadium and theater interlock detachable elastic flat PP mat sport flooring is a technical activity and requires a professional installation team to lay the pavement. In the sports wooden floor paving process of the stadium, some details need to be pre-processed and the work needs to be completed according to the complete installation process. Sc-zsfloor rest assured Variable-scale mixing method: the seams of the sports wooden floor are staggered. It is a common phenomenon. It seems that it is very chaotic. The seams of the sports wooden floor are not uniform or regular, but it is very strange. Why is that? This is actually due to the problem of resonance. The moving wooden floor will resonate during the impact process, and such a mixed-strip method can well avoid this situation and ensure the stability of the sports wooden floor system. Sc-zsfloor rest assured The gymnasium has high requirements for sports wooden flooring, so the materials are made of maple, maple birch and other woods. It guarantees pure solid wood. After special processing, the badminton hall wooden floor will not be easily damp, because wood After the floor is wet, it will show bulging, deformation and bending. Sc-zsfloor rest assured Sports wood flooring is a detachable elastic flat PP mat sport flooring manufacturer with good sports performance that is different from home wood flooring. It is a set of integral structural system. The beautiful appearance and not easy to use are the unique features of sports wood flooring. The floor is the main basis for the sports hall to measure whether it is professional.
add to favorites Sports floor selection l/mile No $
No Picture
Most of the friends have to find a few more to compare when buying sports wood flooring. It is easy to find that the price varies greatly. The price difference makes it harder for customers who have no previous start. What is the reason for the difference in the price of sports wood flooring? interlocking elastic pro sport court quotes? For most users, many people are very concerned about the price of solid wood sports flooring. This is especially true when the construction budget of Party A’s stadiums is tight. Therefore, today we and the sc-zsfloor engineer Zhang Gong together to analyze, combined with sports venues how to choose sports flooring and use precautions and other comprehensive analysis. How to choose sports flooring for sports venues We have to choose trees with moderate hardness and not easy to produce wood thorns. Reduce the likelihood of athletes being injured during exercise. Among the common tree species, it is suitable to choose sports wood flooring made of maple and eucalyptus. The main features are as follows: 1. The sports floor ball made of maple and eucalyptus has good rebound performance and is effective in earthquake resistance and sound insulation. Sports wooden floor offer 2. Huankang, basically does not breed termites, construction is pollution-free. 3. It is not easy to deform and will not damage the original ground. 4. The texture is soft and moderate, and people have a good feeling when they are exercising on the floor. Precautions for the use of sports floor Sports wooden floor offer The use of the sports floor is a very worthy thing to pay attention to, only to increase the service life of the synthesis elastic knight sport flooring, in order to play a better role. In the process of using the sports floor, we need to do some sandstone protection work, because these sandstones will cause some traumatic wear on the sports floor. Under such wear, the sports wood floor can be greatly shortened. Service life Secondly, when using the floor of the sports field, it is necessary to pay special attention to the handling of various equipments of the sports floor. Once the damage is caused to the sports wooden floor during the handling process, it is very serious and worthy of everyone's deep thought. Third, we also need to pay attention to the fireworks problem in the sports field, which has a great impact on the current sports floor. Consumers choose solid wood sports flooring, first of all to observe whether the board surface is smooth enough, whether the surface of the interlocking elastic knight sport flooring is very smooth. Rub the board back and forth with a dry hand. If it is too slippery or too sloppy, the board is not good. You should know how important the friction is in the intense exercise for the athlete. If the friction is too small, people can easily slip; otherwise, if the friction is too large, there will be a phenomenon known as "squatting", which will not guarantee the safety of the exercise.
add to favorites Mobile installation l/mile No $
No Picture
The floor and the floor are bonded together by a special connecting belt provided by the manufacturer. The elastic knight sport flooring are not bonded, and the PVC plastic sports floor can be rolled up or removed at will, and is convenient to move. Fixed installation 1. Semi-fixed type: special double-sided tape, which is bonded with the special double-sided tape of the manufacturer's matching between the floor and the floor. At the same time, the floor and the floor are also bonded together, which can effectively prevent the floor from happening due to strenuous exercise. Moving, slitting, and making it easy to move the entire site in the future. 2. Partial bonding: 20 cm of adhesive bonding on the ground with the edge of the floor as the reference. 3. Fully glued: all glued on the ground to be laid. [Basic requirements]: The ground floor of the construction must be clean, long-lasting and clean, with high flatness and no cracks. The concrete floor moisture content cannot exceed 2.5%. The moisture content of the gypsum floor shall not exceed 0.5%. Before the floor is laid. After the floor is dusted, PVC plastic sports flooring can be laid. If the original ground is uneven, it can also construct self-leveling of about 2mm. If it is non-absorbent ground such as mineral base, stone, ceramic tile, etc., it can be directly paved. [Note]: If it is a wet floor such as a basement, the floor must be waterproof to isolate water vapor. installation steps 1. The ground should be laid flat and clean. 2. PVC plastic sports flooring must be laid out in advance for laying on the ground for more than 24 hours before laying, and the site temperature should not be lower than 15 °C. After the interlocking knight sport flooring is restored, the ends should be kept 5 cm more. Before sticking, roll the unfolded floor back about halfway, then scrape the glue – starting from the middle – the glue is applied with a toothed scraper. 3. Arrange in the order of the number of the floor, align and merge, pay attention to the alignment of the site line during the paving process. 4. Open the adjacent two pieces of floor along the joint, place the special connecting belt of the manufacturer on the lower side of the joint, brush the glue on the surface of the joint, first stick one of the plates to the half of the joint, then Stick the other half to the remaining connecting strips and tighten the gap. 5. It is recommended to use water-soluble glue that is harmless to the human body for construction. When the floor is pasted, use the cork block to squeeze the floor surface from the middle to the ends so that it is flat without leaving air bubbles, and the roller is completely rolled flat. 6. After the floor is paved, it will be slotted and welded. After welding, the wire should be leveled. Technical indicators Vibration absorption ≥ 5.3% This indicator mainly refers to the floor should have good impulse absorption performance. When the athletes land in the movement, the rebound force is minimized, and the athlete's bones are prevented from vibrating by the rebound force. The minimum requirement is 53%, that is, when the local board is under load, more than 53% of this load is absorbed by the floor, and only 47% is reflected on the athlete's leg and body. Vertical deformation ≥2.3mm When the athlete is landing with 1500N strength in motion, the vertical vertical deformation height of the grounding point should be no less than 2.3mm. This indicator requires that the sports floor should have a certain degree of “toughness” and not be as hard as a concrete floor. Plane deformation W500≤15% This index requires the floor to have certain "toughness" and also has a certain "rigidity". Specific measurement method: When a 20Kg weight falls on the ground at a certain height, the ground vertical deformation is A, and the vertical height is B at the exit point 500MM. Then the requirement: the ratio of the two points B and A should be less than or equal to 15% (ie W500 = maximum 15%). Sliding characteristics 0.5 ≤ f ≤ 0.7 This index requires that the friction of the floor surface is too large. When the athlete suddenly stops moving during the movement, it is easy to strain the muscle. If the friction is too small, the athlete suddenly stops moving during the movement. It is easy to fall. This indicator requires that the footsteps in the movement suddenly stop and finally rest, and the sliding distance should be kept between 0.5 and 0.7%. Ball rebound ≥90% If a 600g standard basketball rebounds from 1.8m to the concrete floor, the height is A, and when it falls to the standard prefabricated knight sport flooring, the rebound height is B, then the ratio of B and A should be Greater than or equal to 90%. Rolling load ≥ 2500N can withstand the rolling of sports equipment on the field by hand cart, can bear the load greater than 2500N, this indicator requires that the load-bearing load of the sports floor is firm, the service life must meet the requirements of competition and training, such as the active basketball stand and related When the sports facilities move on the sports floor, the surface and structure of the sports floor cannot be destroyed.
add to favorites Working method of Hot selling wheat thresher rice thresher Soybean Sheller l/mile No  
The emergence of wheat thresher rice thresher soybean sheller equipment, instead of the traditional artificial shelling, not only saves a lot of physical strength but also improves the efficiency of shelling. However, after many users purchase the equipment, the working method of the equipment is still a lot of places to borrow. Today, Aike will tell you about the working method of the Hot selling wheat thresher rice thresher Soybean Sheller. During work, when the wheat bran carrying the shell is sent from the feeding port to the fruit picking drum and the curved bottom screen, it is first hit by the picking claws, and the wheat bran is grasped, and the claws are moved together. Due to the gap limitation between the claws and the curved bottom screen, the wheat crucible is rubbed and squeezed between the fruit picking drum and the curved bottom screen and is subjected to vibration. The wheat stalk is quickly separated by the rotation of the fruit picking drum and the rubbing and vibration. The picked peanuts are driven by the spiral propulsion of the picked fruit, rolled up to the big end of the fruit picking drum, and the peanut fruit, leaves, soil and a part of the broken mites after picking the fruit are leaked through the curved bottom sieve. During the process of leakage, the leaves, soil and most of the lighter shreds are blown out of the body due to the action of the fan. Peanut fruit is cleaned and falls into the lower part of the rack due to its heavy weight. Thus, the work of mechanical picking and cleaning is completed at one time. In fact, with the continuous advancement of technology, more and more high-tech equipment has emerged, making our life more comfortable, part of the thresher shelling machine.