|Title||The abstruse characteristics of Raymond cutting roller|
|Description||Raymond cutting roller abstruse characteristics refers to the amount of cutting roller apparent teeth, cutting angle, cutting teeth and a brace of cutting caster cutting teeth and so on. 1) Raymond Mill Amount of Rows The amount of teeth is bidding as the amount of teeth in the circumferential breadth of the apparent of the roller, that is, the amount of teeth per centimeter or per inch. 2) Cutting bend The apparent of the roller is cut by the cartoon machine, and the bend amid the two bevels is alleged the tooth angle. 3) Raymond Cutting Tilt In adjustment to enhance the crushing and stripping ability, abate activity burning and advance the superior of flour, the apparent of the roller accept to accept a dip bend with the butt bus. If there is no abruptness of the cutting teeth, again the actual can not be continuously ground, the bran will be cut into strips, the plan will could cause the roller vibration, consistent in accident to cutting teeth. In general, the affection is bidding by the adjustment of the breadth L of the roller and the adjustment of the cutting distance, and the abruptness is s / L: l: 7 to 1: 10. You can aswell use the affection bend a, usually a = 10. ~ L6. 4) Ultrafine mill grinds The two rollers are abiding at altered speeds, and there are four altered means of adjustment because of the bend of the blaze and the birdbrained angle.|
Please register or log in.