Please register or log in.
Item details add to favorites
Category Economy cars
No Picture
Created 2018-11-07
Owner juniperqq
Title Grinding disc cutting machine operating procedures
Description Fast cheap metal grinding disc cutting machine operating procedures 1 Labor protection supplies must be in place before work to check whether the equipment has a qualified grounding wire. 2 Check to see if the fast cheap metal grinding disc cutter is in good condition and the grinding disc has crack defects. It is forbidden to use sick equipment and unqualified grinding disc. 3 If the material is cut, the force may not be too strong or suddenly hit. If there is any abnormality, turn off the power immediately. 4 The material to be cut should be clamped with a vise. It is not allowed to support one person to cut the material, and the person must stand on the side of the fast cheap metal grinding disc when cutting. 5 When replacing the fast cheap metal grinding disc, wait until the equipment stops, and check the grinding disc. 6 During operation, tools and other items are not allowed to be stored on the rack. 7 The fast cheap metal grinding disc cutting machine should be placed on a stable ground, away from flammable materials, and the power cord should be connected to the leakage protection device. 8 The fast cheap metal grinding disc cutting piece should be installed as required, and the test starting operation should be stable before starting work. 9 The clamping device should be safe and reliable to prevent accidents from loosening the workpiece. 10 When cutting, the operator should evenly cut and avoid the front side of the cutting piece to prevent accidents caused by improper operation of the cutting piece. 11 After the work is finished, the surface of the fast cheap metal grinding disc cutting machine should be wiped and the workplace should be cleaned. The open storage should be protected from rain.
Consumption  
Broken No
Price  
Promotion level None